Merge branch 'ui' into develop

locales/en.yml

@@ -14,7 +14,7 @@ common_error:
     failed_download_weight_whisper: "Whisper weight download error."
     translation_limit: "Translation engine limit error."
     deepl_auth_key_invalid_length: "DeepL auth key length is not correct."
-    deepl_auth_key_failed_authentication: "Authentication failure of deepL auth key."
+    deepl_auth_key_failed_authentication: "Auth Key is incorrect or Usage limit reached."
 
     invalid_value_mic_record_timeout: "It cannot be greater than '{{mic_phrase_timeout_label}}' with a value of 0 or more."
     invalid_value_mic_phrase_timeout: "It cannot be set lower than '{{mic_record_timeout_label}}' with a value of 0 or more."
@@ -29,13 +29,14 @@ main_page:
     transcription_send: "Voice2Chatbox"
     transcription_receive: "Speaker2Log"
     foreground: "Foreground"
+
     language_settings: "Language Settings"
     your_language: "Your Language"
     translate_each_other_label: "Translate Each Other"
     swap_button_label: "Swap Languages"
     target_language: "Target Language"
     translator: "Translator"
-    # translator_label_default: "Default"
+    translator_label_default: "Default"
 
     translator_selector:
         is_selected_same_language: "Since the same language is selected for both '{{your_language}}' and '{{target_language}}', only '{{ctranslate2}}' is available."
@@ -83,11 +84,11 @@ config_page:
 
     device:
         check_volume: "Check Volume"
-        mic_host_device:
-            label: "Mic Device"
         label_auto_select: "Auto Select"
         label_host: "Host/Driver"
         label_device: "Device"
+        mic_host_device:
+            label: "Mic Device"
         mic_dynamic_energy_threshold:
             label_for_automatic: "Mic Energy Threshold (Current Setting: Automatic)"
             desc_for_automatic: "Automatically determine microphone input sensitivity."
@@ -95,8 +96,6 @@ config_page:
             desc_for_manual: "Manually determine the microphone input sensitivity using the slider. Press the microphone icon to input your voice and adjust the sensitivity while monitoring the volume."
         speaker_device:
             label: "Speaker Device"
-            label_auto_select: "Auto Select"
-            label_device: "Device"
         speaker_dynamic_energy_threshold:
             label_for_automatic: "Speaker Energy Threshold (Current Setting: Automatic)"
             desc_for_automatic: "Automatically determine speaker input sensitivity."
@@ -133,11 +132,10 @@ config_page:
         deepl_auth_key:
             label: "DeepL Auth Key"
             desc: "Please select {{translator}} on the main screen with DeepL_API when using. ※Some languages may not be supported."
+            open_auth_key_webpage: "Open DeepL Account Webpage"
             save: "Save"
             edit: "Edit"
-            open_auth_key_webpage: "Open DeepL Account Webpage"
             auth_key_success: "Auth key update completed."
-            auth_key_error: "Auth Key is incorrect or Usage limit reached."
 
     transcription:
         section_label_mic: "Mic"
@@ -197,11 +195,11 @@ config_page:
         ui_scaling: "UI Scaling"
         display_duration: "Display duration"
         fadeout_duration: "Fadeout duration"
+        common_settings: "Common Settings"
         tracker: "Tracker"
         hmd: "HMD"
         left_hand: "Left hand"
         right_hand: "Right hand"
-        common_settings: "Common Settings"
         overlay_show_only_translated_messages:
             label: "Show Only Translated Messages"
 

locales/ja.yml

@@ -12,30 +12,31 @@ common_error:
     threshold_invalid_value: "{{min}} から {{max}} までの数値で設定できます。"
     failed_download_weight_ctranslate2: "CTranslate2 モデルのダウンロードに失敗しました。"
     failed_download_weight_whisper: "Whisper モデルのダウンロードに失敗しました。"
-    translation_limit: "翻訳エンジンの使用制限に達したか、一時的に制限がかけられています。"
+    translation_limit: "翻訳エンジンの使用制限に達したか、一時的に利用制限がかけられています。"
     deepl_auth_key_invalid_length: "認証キーの文字数が間違っています。"
     deepl_auth_key_failed_authentication: "認証キーが間違っているか、API使用制限が上限に達しています。"
 
     invalid_value_mic_record_timeout: "0 以上で 「{{mic_phrase_timeout_label}}」 より大きくすることはできません。"
     invalid_value_mic_phrase_timeout: "0 以上で 「{{mic_record_timeout_label}}」 より小さくすることはできません。"
-    invalid_value_mic_max_phrase: "0以上の数値を設定できます。"
+    invalid_value_mic_max_phrase: "0 以上の数値を設定できます。"
 
     invalid_value_speaker_record_timeout: "0 以上で 「{{speaker_phrase_timeout_label}}」 より大きくすることはできません。"
     invalid_value_speaker_phrase_timeout: "0 以上で 「{{speaker_record_timeout_label}}」 より小さくすることはできません。"
-    invalid_value_speaker_max_phrase: "0以上の数値を設定できます。"
+    invalid_value_speaker_max_phrase: "0 以上の数値を設定できます。"
 
 main_page:
     translation: "翻訳"
-    transcription_send: "音声認識（マイク）"
+    transcription_send: "音声認識 マイク"
-    transcription_receive: "音声認識（スピーカー）"
+    transcription_receive: "音声認識 スピーカー"
     foreground: "最前面固定"
+
     language_settings: "言語設定"
     your_language: "あなたの言語"
     translate_each_other_label: "双方向に翻訳"
     swap_button_label: "言語を入れ替え"
     target_language: "相手の言語"
     translator: "翻訳エンジン"
-    # translator_label_default: "Default"
+    translator_label_default: "デフォルト"
 
     translator_selector:
         is_selected_same_language: "「{{your_language}}」と「{{target_language}}」に同じ言語が選択がされているため、「{{ctranslate2}}」のみが使用できます。"
@@ -83,23 +84,22 @@ config_page:
 
     device:
         check_volume: "音量チェック"
-        mic_host_device:
-            label: "マイク （デバイス）"
         label_auto_select: "自動選択"
         label_host: "ホスト/ドライバー"
         label_device: "デバイス"
+        mic_host_device:
+            label: "マイク （デバイス）"
         mic_dynamic_energy_threshold:
-            label_for_automatic: "マイク入力感度の調整 (現在の設定: 自動)"
+            label_for_automatic: "マイク入力感度の調整 （現在の設定: 自動）"
             desc_for_automatic: "マイクの入力感度を自動的に調節する。"
-            label_for_manual: "マイク入力感度の調整 (現在の設定: 手動)"
+            label_for_manual: "マイク入力感度の調整 （現在の設定: 手動）"
             desc_for_manual: "スライダーを調整して入力感度を手動で決められます。マイクのアイコンを押すと、実際に声を入力し、音量を確認しながら調節できます。"
         speaker_device:
             label: "スピーカー （デバイス）"
-            label_auto_select: "自動選択"
         speaker_dynamic_energy_threshold:
-            label_for_automatic: "スピーカー入力感度の調整 (現在の設定: 自動)"
+            label_for_automatic: "スピーカー入力感度の調整 （現在の設定: 自動）"
             desc_for_automatic: "スピーカーの入力感度を自動的に調節する。"
-            label_for_manual: "スピーカー入力感度の調整 (現在の設定: 手動)"
+            label_for_manual: "スピーカー入力感度の調整 （現在の設定: 手動）"
             desc_for_manual: "スライダーを調整して入力感度を手動で決められます。ヘッドフォンのアイコンを押すと、実際に音声を聞き取り、音量を確認しながら調節できます。"
 
     appearance:
@@ -125,8 +125,8 @@ config_page:
         ctranslate2_weight_type:
             label: "AI翻訳 {{ctranslate2}} のモデルタイプ"
             desc: "翻訳エンジン「{{ctranslate2}}」で翻訳する際に、使用する翻訳モデルを選択できます。"
-            small: "通常モデル ({{capacity}})"
+            small: "通常モデル （{{capacity}}）"
-            large: "高精度モデル ({{capacity}})"
+            large: "高精度モデル （{{capacity}}）"
         ctranslate2_compute_device:
             label: "AI翻訳 {{ctranslate2}} の処理デバイス"
         deepl_auth_key:
@@ -169,8 +169,8 @@ config_page:
         whisper_weight_type:
             label: "Whisperモデルのタイプ"
             desc: "容量が大きいモデルほど精度は高いですが、その分CPUやGPUを占有します。\n※特にmediumより容量の大きいモデルは、CPU/GPUの性能によっては使用すらも困難です。"
-            model_template: "{{model_name}} モデル ({{capacity}})"
+            model_template: "{{model_name}} モデル （{{capacity}}）"
-            recommended_model_template: "{{model_name}} モデル ({{capacity}}) (推奨)"
+            recommended_model_template: "{{model_name}} モデル （{{capacity}}） [推奨]"
         whisper_compute_device:
             label: "Whisperで使用する処理デバイス"
 
@@ -196,17 +196,17 @@ config_page:
         display_duration: "表示時間"
         fadeout_duration: "フェードアウト時間"
         common_settings: "共通設定"
+        tracker: "表示するトラッカーの位置"
         hmd: "HMD"
         left_hand: "左手"
         right_hand: "右手"
-        tracker: "表示するトラッカーの位置"
         overlay_show_only_translated_messages:
             label: "翻訳後のメッセージのみ表示する"
 
     others:
         section_label_sounds: "サウンド"
         auto_clear_the_message_box:
-            label: "送信後はチャットボックスを空にする"
+            label: "送信後はメッセージ入力欄を空にする"
         send_only_translated_messages:
             label: "翻訳後のメッセージのみ送信する"
         auto_export_message_logs:
@@ -229,11 +229,11 @@ config_page:
         toggle_vrct_visibility:
             label: "VRCTの最小化/アクティブ化の切り替え"
         toggle_translation:
-            label: "{{translation}}機能切り替え"
+            label: "「{{translation}}」 オン/オフの切り替え"
         toggle_transcription_send:
-            label: "{{transcription_send}}機能切り替え"
+            label: "「{{transcription_send}}」 オン/オフの切り替え"
         toggle_transcription_receive:
-            label: "{{transcription_receive}}機能切り替え"
+            label: "「{{transcription_receive}}」 オン/オフの切り替え"
 
     advanced_settings:
         osc_ip_address:

locales/ko.yml

@@ -29,13 +29,17 @@ main_page:
     transcription_send: "음성인식 (마이크)"
     transcription_receive: "음성인식 (스피커)"
     foreground: "항상 위로"
+
     language_settings: "언어 설정"
     your_language: "당신의 언어"
     translate_each_other_label: "양방향으로 번역"
     swap_button_label: "언어 교체"
     target_language: "상대방의 언어"
     translator: "번역 엔진"
-    # translator_label_default: "기본값"
+    translator_label_default: "기본값"
+
+    translator_selector:
+        is_selected_same_language:
 
     message_log:
         all: "전체"
@@ -43,6 +47,9 @@ main_page:
         received: "수신"
         system: "시스템"
 
+        show_resend_button:
+        resend_button_on_hover_desc:
+
     state_text_enabled: "Enabled"
     state_text_disabled: "Disabled"
 
@@ -54,24 +61,33 @@ main_page:
     updating: "업데이트 중..."
 
 update_modal:
-    update_software: "새 버전을 다운로드하고 재시작합니다.\n조금 시간이 걸립니다. 지금 시작할까요?"
+    cpu_desc:
-    deny_update_software: "나중에 하기"
+    cuda_desc:
-    accept_update_software: "업데이트 및 재시작"
+    cuda_compare_cpu_desc:
-
+    cuda_disk_space_desc:
+    close_modal:
+    download_latest_and_restart:
+    is_latest_version_already:
+    is_current_compute_device:
 
 config_page:
     version: "버전 {{version}}"
+    model_download_button_label:
     side_menu_labels:
+        device:
         appearance: "모양"
         translation: "번역"
         transcription: "음성인식"
         others: "기타"
+        hotkeys:
         advanced_settings: "고급 설정"
 
     device:
-        mic_host:
+        check_volume:
-            label: "마이크 호스트/드라이버"
+        label_auto_select:
-        mic_device:
+        label_host: "호스트/드라이버"
+        label_device:
+        mic_host_device:
             label: "마이크 장치"
         mic_dynamic_energy_threshold:
             label_for_automatic: "음성 입력 최소 볼륨 (현재 설정: 자동)"
@@ -111,15 +127,20 @@ config_page:
             desc: "오프라인 번역 시의 번역 모델을 변경합니다."
             small: "일반 모델 ({{capacity}})"
             large: "정밀 모델 ({{capacity}})"
+        ctranslate2_compute_device:
+            label:
         deepl_auth_key:
             label: "DeepL 인증키"
             desc: "사용시 메인화면에 있는 {{translator}}를 DeepL_API로 변경해 주세요.\n지원하지 않는 언어도 있습니다."
             open_auth_key_webpage: "DeepL 계정 페이지 열기"
+            save:
+            edit:
             auth_key_success: "인증키 갱신이 완료되었습니다."
 
     transcription:
         section_label_mic: "마이크"
         section_label_speaker: "스피커"
+        section_label_transcription_engines:
         mic_record_timeout:
             label: "최대 무음 시간"
             desc: "무음을 감지하고 설정된 시간(초)만큼의 시간이 지나면 음성 입력이 종료된 것으로 판단합니다."
@@ -143,29 +164,76 @@ config_page:
         speaker_max_phrase:
             label: "최대 입력 절(phrases) 수"
             desc: "식된 단어 수의 하한값으로, 이 수치를 초과하는 경우에만 결과를 로그에 표시합니다."
-        use_whisper_feature:
+        select_transcription_engine:
-            label: "음성 인식에 Whisper 모델을 사용"
+            label:
-            desc: "일부 언어에서는 음성 인식의 정확도가 향상될 수 있어요. 음성 인식 중 CPU 사용률이 올라가기 때문에 사용하시는 PC의 사양을 고려하여 이 기능을 사용해주세요."
         whisper_weight_type:
             label: "Whisper 모델 타입"
-            # desc: "기본적으로 용량이 많은 모델일수록 정밀도는 높지만, 음성 인식의 시간이 늘어나며 CPU 사용률도 늘어나요.각 모델의 설명은 문서를 참조해주세요.\n※특히 medium보다 용량이 큰 모델은 CPU의 성능에 따라서는 사용조차 어려울 수 있어요. "
+            desc:
             model_template: "{{model_name}} 모델 ({{capacity}})"
             recommended_model_template: "{{model_name}} 모델 ({{capacity}}) (권장)"
+        whisper_compute_device:
+            label:
+
+    vr:
+        single_line:
+        multi_lines:
+        overlay_enable:
+        restore_default_settings:
+        position:
+        rotation:
+        x_position:
+        y_position:
+        z_position:
+        x_rotation:
+        y_rotation:
+        z_rotation:
+        sample_text_button:
+            start:
+            stop:
+            sample_text:
+        opacity:
+        ui_scaling:
+        display_duration:
+        fadeout_duration:
+        common_settings:
+        tracker:
+        hmd:
+        left_hand:
+        right_hand:
+        overlay_show_only_translated_messages:
+            label:
 
     others:
+        section_label_sounds:
         auto_clear_the_message_box:
             label: "챗박스 자동 삭제"
         send_only_translated_messages:
             label: "번역된 메시지만 전송"
-        notice_xsoverlay:
-            label: "XSOverlay에서 알림 수신 기능 활성화"
-            desc: "수신된 메시지를 XSOverlay의 기능을 통해 알림으로 받아볼 수 있습니다."
         auto_export_message_logs:
             label: "대화 로그 자동 저장"
             desc: "logs 폴더에 텍스트 파일로 로그가 저장됩니다."
+        vrc_mic_mute_sync:
+            label:
+            desc:
         send_message_to_vrc:
             label: "VRChat에 메시지 전송"
             desc: "VRChat에 메시지를 보내지 않고 사용할 수 있는 방법이 있지만 지원되지 않습니다. VRChat에 메시지를 보내려면 이 기능을 활성화하세요."
+        notification_vrc_sfx:
+            label:
+            desc:
+        send_received_message_to_vrc:
+            label:
+            desc:
+
+    hotkeys:
+        toggle_vrct_visibility:
+            label:
+        toggle_translation:
+            label:
+        toggle_transcription_send:
+            label:
+        toggle_transcription_receive:
+            label:
 
     advanced_settings:
         osc_ip_address:
@@ -174,3 +242,5 @@ config_page:
             label: "OSC 포트"
         open_config_filepath:
             label: "설정 파일 열기"
+        switch_compute_device:
+            label:

locales/zh-Hans.yml

@@ -29,13 +29,17 @@ main_page:
     transcription_send: "你的语音转文字"
     transcription_receive: "他人语音转文字"
     foreground: "顶层显示"
+
     language_settings: "语言设定"
     your_language: "你的语言"
     translate_each_other_label: "双向翻译"
     swap_button_label: "互换"
     target_language: "目标语言"
     translator: "翻译器"
-    # translator_label_default: "默认"
+    translator_label_default: "默认"
+
+    translator_selector:
+        is_selected_same_language:
 
     message_log:
         all: "全部"
@@ -43,6 +47,9 @@ main_page:
         received: "接受"
         system: "系统"
 
+        show_resend_button:
+        resend_button_on_hover_desc:
+
     state_text_enabled: "启用"
     state_text_disabled: "停用"
 
@@ -54,24 +61,33 @@ main_page:
     updating: "更新中..."
 
 update_modal:
-    update_software_desc: "下载新版本并自动启动\n会花少许时间,现在更新吗?"
+    cpu_desc:
-    deny_update_software: "稍后再说"
+    cuda_desc:
-    accept_update_software: "更新后自动启动"
+    cuda_compare_cpu_desc:
-
+    cuda_disk_space_desc:
+    close_modal:
+    download_latest_and_restart:
+    is_latest_version_already:
+    is_current_compute_device:
 
 config_page:
     version: "版本 {{version}}"
+    model_download_button_label:
     side_menu_labels:
+        device:
         appearance: "外观"
         translation: "翻译"
         transcription: "转录"
         others: "其他"
+        hotkeys:
         advanced_settings: "高级设置"
 
     device:
-        mic_host:
+        check_volume: "Check Volume"
-            label: "麦克风(host/driver)"
+        label_auto_select: "Auto Select"
-        mic_device:
+        label_host: "Host/Driver"
+        label_device: "Device"
+        mic_host_device:
             label: "麦克风 (设备)"
         mic_dynamic_energy_threshold:
             label_for_automatic: "麦克风输入阈值(当前设置:自动)"
@@ -111,15 +127,20 @@ config_page:
             desc: "可以选择用于离线翻译的翻译模型"
             small: "普通模型 ({{capacity}})"
             large: "高精度模型 ({{capacity}})"
+        ctranslate2_compute_device:
+            label:
         deepl_auth_key:
             label: "DeepL 授权密匙"
             desc: "在使用的时候,使用时请在主屏幕上通过 DeepL_API 选择 {{translator}}\n※某些语言可能不支持"
             open_auth_key_webpage: "打开DeepL账号页面"
+            save:
+            edit:
             auth_key_success: "授权密匙认证完成。"
 
     transcription:
         section_label_mic: "你的麦克风"
         section_label_speaker: "他人声音"
+        section_label_transcription_engines:
         mic_record_timeout:
             label: "语音输入结束后的静音时间"
             desc: "当检测到静音并经过设定的秒数后，语音输入即被视为完成。"
@@ -143,31 +164,47 @@ config_page:
         speaker_max_phrase:
             label: "语音接收时的最小单词数"
             desc: "转录字数的下限,只有超过这个数字,才会记录转录结果"
-        use_whisper_feature:
+        select_transcription_engine:
-            label: "使用Whisper模型翻译"
+            label:
-            desc: "在某些语言中,语音识别的准确性可能会提高.语音识别的过程中,CPU占有率可能会提高,请根据你的pc性能来决定是否使用它."
         whisper_weight_type:
             label: "选择某个Whisper模型"
-            # desc: |-
+            desc:
-            #     通常来说,容量越大的模型精度也会越高,但也会增加文字显示所需要的时间和CPU的使用率。请浏览各个模型的文档
-            #     ※特别是大于medium容量的模型、因CPU性能原因甚至无法使用。
             model_template: "{{model_name}} 模型 ({{capacity}})"
             recommended_model_template: "{{model_name}} 模型 ({{capacity}}) (推荐)"
+        whisper_compute_device:
+            label:
 
     vr:
+        single_line:
+        multi_lines:
+        overlay_enable:
         restore_default_settings: "恢复默认设置"
-        opacity: "透明度"
+        position:
-        ui_scaling: "大小"
+        rotation:
         x_position: "X轴(左右)"
         y_position: "Y轴(上下)"
         z_position: "Z轴(前后)"
         x_rotation: "X轴旋转"
         y_rotation: "Y轴旋转"
         z_rotation: "Z轴旋转"
+        sample_text_button:
+            start:
+            stop:
+            sample_text:
+        opacity: "透明度"
+        ui_scaling: "大小"
         display_duration: "显示持续时间"
         fadeout_duration: "渐隐持续时间"
+        common_settings:
+        tracker:
+        hmd:
+        left_hand:
+        right_hand:
+        overlay_show_only_translated_messages:
+            label:
 
     others:
+        section_label_sounds:
         auto_clear_the_message_box:
             label: "发言后自动清空chatbox"
         send_only_translated_messages:
@@ -181,6 +218,22 @@ config_page:
         send_message_to_vrc:
             label: "发送信息至VRChat"
             desc: "不发送信息至VRChat的情况下也能使用它,但该功能现在并未完成.在想要发送信息时,请不要忘记打开这个功能."
+        notification_vrc_sfx:
+            label:
+            desc:
+        send_received_message_to_vrc:
+            label:
+            desc:
+
+    hotkeys:
+        toggle_vrct_visibility:
+            label:
+        toggle_translation:
+            label:
+        toggle_transcription_send:
+            label:
+        toggle_transcription_receive:
+            label:
 
     advanced_settings:
         osc_ip_address:
@@ -189,3 +242,5 @@ config_page:
             label: "OSC 端口"
         open_config_filepath:
             label: "打开设置文件"
+        switch_compute_device:
+            label:

locales/zh-Hant.yml

@@ -29,13 +29,17 @@ main_page:
     transcription_send: "麥克風轉文字"
     transcription_receive: "喇叭轉文字"
     foreground: "最上層顯示"
+
     language_settings: "語言設定"
     your_language: "你的語言"
     translate_each_other_label: "互相翻譯"
     swap_button_label: "交換語言"
     target_language: "目標語言"
     translator: "翻譯器"
-    # translator_label_default: "預設"
+    translator_label_default: "預設"
+
+    translator_selector:
+        is_selected_same_language:
 
     message_log:
         all: "全部"
@@ -43,6 +47,9 @@ main_page:
         received: "已接收"
         system: "系統"
 
+        show_resend_button:
+        resend_button_on_hover_desc:
+
     state_text_enabled: "啟用"
     state_text_disabled: "停用"
 
@@ -54,25 +61,33 @@ main_page:
     updating: "正在更新..."
 
 update_modal:
-    update_software_desc: "下載新版本並自動更新 VRCT。\n會花一些時間，現在更新嗎？"
+    cpu_desc:
-    deny_update_software: "稍後再說"
+    cuda_desc:
-    accept_update_software: "更新"
+    cuda_compare_cpu_desc:
-
+    cuda_disk_space_desc:
+    close_modal:
+    download_latest_and_restart:
+    is_latest_version_already:
+    is_current_compute_device:
 
 config_page:
     version: "版本 {{version}}"
+    model_download_button_label:
     side_menu_labels:
+        device:
         appearance: "外觀"
         translation: "翻譯"
         transcription: "轉錄"
-        vr: "VR"
         others: "其他"
+        hotkeys:
         advanced_settings: "進階設定"
 
     device:
-        mic_host:
+        check_volume: "Check Volume"
-            label: "麥克風 Host/Driver"
+        label_auto_select: "Auto Select"
-        mic_device:
+        label_host: "Host/Driver"
+        label_device: "Device"
+        mic_host_device:
             label: "麥克風裝置"
         mic_dynamic_energy_threshold:
             label_for_automatic: "麥克風能量閾值（當前設置：自動）"
@@ -112,15 +127,20 @@ config_page:
             desc: "你可以選擇用於離線翻譯引擎的翻譯模型。"
             small: "基本模型（{{capacity}}）"
             large: "高準確率模型（{{capacity}}）"
+        ctranslate2_compute_device:
+            label:
         deepl_auth_key:
             label: "DeepL 授權金鑰"
             desc: "使用 DeepL API 時請在主螢幕選擇 {{translator}}。※可能不支援某些語言。"
             open_auth_key_webpage: "打開 DeepL 帳號頁面"
+            save:
+            edit:
             auth_key_success: "授權金鑰更新完成。"
 
     transcription:
         section_label_mic: "麥克風"
         section_label_speaker: "喇叭"
+        section_label_transcription_engines:
         mic_record_timeout:
             label: "麥克風音訊 - 判定結束時間"
             desc: "麥克風未收到音訊後，結束一段話的判定時間（秒）。"
@@ -144,38 +164,51 @@ config_page:
         speaker_max_phrase:
             label: "喇叭音訊 - 最大單詞數量"
             desc: "只有在單詞超過此數量時，才會記錄結果並發送到 VRChat。"
-        use_whisper_feature:
+        select_transcription_engine:
-            label: "使用 Whisper 模型進行轉錄"
+            label:
-            desc: "在某些語言中，語音識別的準確性可能會提高。使用語音識別時，CPU使用率會增加，請根據你的PC規格考慮是否使用此功能。"
         whisper_weight_type:
             label: "選擇 Whisper 模型"
-            # desc: |-
+            desc:
-            #     一般來說，容量較大的模型往往具有更高的準確性，但這也導致轉錄時間較長和CPU使用率增加。請參考文檔了解各模型的說明。
-            #     ※特別是超過中等大小的模型，根據CPU性能可能難以運行。
             model_template: "{{model_name}}模型（{{capacity}}）"
             recommended_model_template: "{{model_name}}模型（{{capacity}}）（推薦）"
+        whisper_compute_device:
+            label:
 
     vr:
+        single_line:
+        multi_lines:
+        overlay_enable:
         restore_default_settings: "恢復預設設定"
-        opacity: "透明度"
+        position:
-        ui_scaling: "介面縮放"
+        rotation:
         x_position: "X軸（左右）"
         y_position: "Y軸（上下）"
         z_position: "Z軸（前後）"
         x_rotation: "X軸旋轉"
         y_rotation: "Y軸旋轉"
         z_rotation: "Z軸旋轉"
+        sample_text_button:
+            start:
+            stop:
+            sample_text:
+        opacity: "透明度"
+        ui_scaling: "介面縮放"
         display_duration: "顯示持續時間"
         fadeout_duration: "淡出持續時間"
+        common_settings:
+        tracker:
+        hmd:
+        left_hand:
+        right_hand:
+        overlay_show_only_translated_messages:
+            label:
 
     others:
+        section_label_sounds:
         auto_clear_the_message_box:
             label: "自動清除 Chatbox"
         send_only_translated_messages:
             label: "僅發送翻譯訊息"
-        notice_xsoverlay:
-            label: "XSOverlay 通知"
-            desc: "從 XSOverlay 的通知功能接收訊息。"
         auto_export_message_logs:
             label: "自動匯出訊息記錄"
             desc: "自動將對話訊息匯出為文字文件。"
@@ -185,6 +218,22 @@ config_page:
         send_message_to_vrc:
             label: "發送訊息到 VRChat"
             desc: "當你打算向 VRChat 發送訊息時啟用此功能。"
+        notification_vrc_sfx:
+            label:
+            desc:
+        send_received_message_to_vrc:
+            label:
+            desc:
+
+    hotkeys:
+        toggle_vrct_visibility:
+            label:
+        toggle_translation:
+            label:
+        toggle_transcription_send:
+            label:
+        toggle_transcription_receive:
+            label:
 
     advanced_settings:
         osc_ip_address:
@@ -193,3 +242,5 @@ config_page:
             label: "OSC 端口"
         open_config_filepath:
             label: "打開設定文件"
+        switch_compute_device:
+            label:

src-ui/app/config_page/setting_section/setting_box/device/Device.jsx

@@ -82,7 +82,7 @@ const Mic_Container = () => {
                 <div className={styles.device_contents}>
 
                     <div className={styles.device_auto_select_wrapper}>
-                        <p className={styles.device_secondary_label}>{t("config_page.device.mic_host_device.label_auto_select")}</p>
+                        <p className={styles.device_secondary_label}>{t("config_page.device.label_auto_select")}</p>
                         <SwitchBox
                             variable={currentEnableAutoMicSelect}
                             toggleFunction={toggleEnableAutoMicSelect}
@@ -91,7 +91,7 @@ const Mic_Container = () => {
 
                     <div className={styles.device_dropdown_wrapper}>
                         <div className={styles.device_dropdown}>
-                            <p className={styles.device_secondary_label}>{t("config_page.device.mic_host_device.label_host")}</p>
+                            <p className={styles.device_secondary_label}>{t("config_page.device.label_host")}</p>
                             <DropdownMenu
                                 dropdown_id="mic_host"
                                 selected_id={currentSelectedMicHost.data}
@@ -104,7 +104,7 @@ const Mic_Container = () => {
                         </div>
 
                         <div className={styles.device_dropdown}>
-                            <p className={styles.device_secondary_label}>{t("config_page.device.mic_host_device.label_device")}</p>
+                            <p className={styles.device_secondary_label}>{t("config_page.device.label_device")}</p>
                             <DropdownMenu
                                 dropdown_id="mic_device"
                                 selected_id={currentSelectedMicDevice.data}
@@ -178,7 +178,7 @@ const Speaker_Container = () => {
                 <div className={styles.device_contents}>
 
                     <div className={styles.device_auto_select_wrapper}>
-                        <p className={styles.device_secondary_label}>{t("config_page.device.speaker_device.label_auto_select")}</p>
+                        <p className={styles.device_secondary_label}>{t("config_page.device.label_auto_select")}</p>
                         <SwitchBox
                             variable={currentEnableAutoSpeakerSelect}
                             toggleFunction={toggleEnableAutoSpeakerSelect}
@@ -186,7 +186,7 @@ const Speaker_Container = () => {
                     </div>
 
                     <div className={styles.device_dropdown}>
-                        <p className={styles.device_secondary_label}>{t("config_page.device.mic_host_device.label_device")}</p>
+                        <p className={styles.device_secondary_label}>{t("config_page.device.label_device")}</p>
                         <DropdownMenu
                             dropdown_id="speaker_device"
                             label={t("config_page.device.speaker_device.label")}

src-ui/app/main_page/sidebar_section/language_settings/translator_selector_open_button/translator_selector/TranslatorSelector.jsx

@@ -15,12 +15,13 @@ export const TranslatorSelector = ({selected_id, translation_engines, is_selecte
                 <div className={styles.wrapper}>
                     {columns.map((column, column_index) => (
                         <div className={styles.column_wrapper} key={`column_${column_index}`}>
-                            {column.map(({ id, label, is_available }) => (
+                            {column.map(({ id, label, is_available, is_default }) => (
                                 <TranslatorBox
                                     key={id}
                                     id={id}
                                     label={label}
                                     is_available={is_available}
+                                    is_default={is_default}
                                     is_selected={(id === selected_id)}
                                 />
                             ))}
@@ -45,6 +46,7 @@ export const TranslatorSelector = ({selected_id, translation_engines, is_selecte
 };
 
 const TranslatorBox = (props) => {
+    const { t } = useTranslation();
     const { setSelectedTranslationEngines} = useLanguageSettings();
     const { updateIsOpenedTranslatorSelector} = useStore_IsOpenedTranslatorSelector();
 
@@ -53,6 +55,10 @@ const TranslatorBox = (props) => {
         { [styles.is_selected]: props.is_selected },
         { [styles.is_available]: props.is_available }
     );
+    const label_default_class_name = clsx(
+        styles.label_default,
+        { [styles.is_selected]: props.is_selected },
+    );
 
     const selectTranslator = () => {
         if (props.is_selected === false) {
@@ -60,9 +66,11 @@ const TranslatorBox = (props) => {
         }
         updateIsOpenedTranslatorSelector(false);
     };
+
     return (
         <div className={box_class_name} onClick={selectTranslator}>
             <p className={styles.translator_name}>{props.label}</p>
+            {props.is_default && <p className={label_default_class_name}>{t("main_page.translator_label_default")}</p>}
         </div>
     );
 };

src-ui/app/main_page/sidebar_section/language_settings/translator_selector_open_button/translator_selector/TranslatorSelector.module.scss

@@ -17,26 +17,26 @@
 }
 
 .wrapper {
-    // padding: 1rem;
     width: 100%;
     height: 100%;
     display: flex;
     flex-direction: column;
     justify-content: center;
     align-items: center;
-    gap: 1rem;
+    gap: 1.4rem;
 }
 
 .column_wrapper {
     display: flex;
     justify-content: center;
     align-items: center;
-    gap: 1rem;
+    gap: 1.2rem;
 }
 
-$box_size: 6rem;
+$box_size: 6.2rem;
 .box {
-    width: 9.2rem;
+    position: relative;
+    width: 9.4rem;
     height: $box_size;
     background-color: var(--dark_875_color);
     display: flex;
@@ -51,10 +51,10 @@ $box_size: 6rem;
     }
     &:active {
         background-color: var(--dark_900_color);
-        border: 0.1rem solid var(--primary_300_color);
+        outline: 0.1rem solid var(--primary_300_color);
     }
     &.is_selected {
-        border: 0.2rem solid var(--primary_300_color);
+        outline: 0.2rem solid var(--primary_300_color);
     }
     &:not(.is_available) {
         pointer-events: none;
@@ -69,6 +69,22 @@ $box_size: 6rem;
     font-size: 1.4rem;
 }
 
+.label_default {
+    background-color: var(--dark_875_color);
+    outline: 0.1rem solid var(--dark_1000_color);
+    padding: 0.2rem 0.4rem;
+    border-radius: 0.2rem;
+    font-size: 1.2rem;
+    position: absolute;
+    top: -0.8rem;
+    right: -0.8rem;
+    pointer-events: none;
+    &.is_selected {
+        outline: 0.1rem solid var(--primary_300_color);
+
+    }
+}
+
 .is_selected_same_language_wrapper {
     position: absolute;
     bottom: 0;

src-ui/app/main_page/sidebar_section/main_function_switch/MainFunctionSwitch.module.scss

@@ -78,7 +78,9 @@ $pending_label_color: var(--dark_500_color);
 }
 
 .toggle_control {
-    @include toggle_control_styles;
+    // @include toggle_control_styles;
+    @include toggle_control_styles($toggle_width: 3.6rem, $toggle_height: 1.4rem);
+
     display: flex;
     justify-content: end;
     align-items: center;

src-ui/common_css/mixins.scss

@@ -48,35 +48,41 @@ $toggle_width: 4rem;
 $toggle_height: 1.6rem;
 $toggle_gutter: 0.1rem;
 $toggle_radius: 50%;
-$toggle_control_speed: .15s;
+$toggle_control_speed: 0.15s;
 $toggle_control_ease: ease-out;
 
-$toggle_radius: calc($toggle_height / 2);
+@mixin toggle_control_styles(
-$toggle_control_size: $toggle_height - calc($toggle_gutter * 2);
+    $toggle_width: $toggle_width,
+    $toggle_height: $toggle_height,
+    $toggle_gutter: $toggle_gutter,
+    $toggle_background_color_on: $toggle_background_color_on,
+    $toggle_background_color_off: $toggle_background_color_off,
+    $toggle_control_color: $toggle_control_color,
+    $toggle_control_speed: $toggle_control_speed,
+    $toggle_control_ease: $toggle_control_ease
+) {
+    $toggle_radius: calc($toggle_height / 2);
+    $toggle_control_size: calc($toggle_height - ($toggle_gutter * 2));
 
-@mixin toggle_control_styles {
-    display: block;
-    position: relative;
-    height: 100%;
-    width: auto;
     .control {
         position: relative;
-        height: $toggle_height;
         width: $toggle_width;
+        height: $toggle_height;
         border-radius: $toggle_radius;
         background-color: $toggle_background_color_off;
+        transition: background-color $toggle_control_speed $toggle_control_ease;
         &:after {
             content: "";
             position: absolute;
-            left: $toggle_gutter;
             top: $toggle_gutter;
+            left: $toggle_gutter;
             width: $toggle_control_size;
             height: $toggle_control_size;
             border-radius: $toggle_radius;
             background: $toggle_control_color;
             transition: left $toggle_control_speed $toggle_control_ease;
         }
-        &.is_pending:after{
+        &.is_pending:after {
             background-color: var(--dark_600_color);
         }
         &.is_hovered {

src-ui/logics/common/useNotificationStatus.js

@@ -15,7 +15,7 @@ export const useNotificationStatus = () => {
         });
     };
 
-    const showNotification_Success = (message) => {
+    const showNotification_Success = (message, options = {}) => {
         updateNotificationStatus({
             status: "success",
             is_open: true,

src-ui/logics/configs/translation/useDeepLAuthKey.js

@@ -1,7 +1,11 @@
 import { useStore_DeepLAuthKey } from "@store";
 import { useStdoutToPython } from "@logics/useStdoutToPython";
+import { useTranslation } from "react-i18next";
+import { useNotificationStatus } from "@logics_common";
 
 export const useDeepLAuthKey = () => {
+    const { t } = useTranslation();
+    const { showNotification_Success, showNotification_Error } = useNotificationStatus();
     const { asyncStdoutToPython } = useStdoutToPython();
     const { currentDeepLAuthKey, updateDeepLAuthKey, pendingDeepLAuthKey } = useStore_DeepLAuthKey();
 
@@ -14,6 +18,10 @@ export const useDeepLAuthKey = () => {
         pendingDeepLAuthKey();
         asyncStdoutToPython("/set/data/deepl_auth_key", selected_deepl_auth_key);
     };
+    const saveSuccessDeepLAuthKey = (saved_deepl_auth_key) => {
+        updateDeepLAuthKey(saved_deepl_auth_key);
+        showNotification_Success(t("config_page.translation.deepl_auth_key.auth_key_success"));
+    };
 
     const deleteDeepLAuthKey = () => {
         pendingDeepLAuthKey();
@@ -25,6 +33,7 @@ export const useDeepLAuthKey = () => {
         getDeepLAuthKey,
         updateDeepLAuthKey,
         setDeepLAuthKey,
+        saveSuccessDeepLAuthKey,
         deleteDeepLAuthKey,
     };
 };

src-ui/logics/useReceiveRoutes.js

@@ -148,7 +148,7 @@ export const useReceiveRoutes = () => {
     const { updateSpeakerPhraseTimeout } = useSpeakerPhraseTimeout();
     const { updateSpeakerMaxWords } = useSpeakerMaxWords();
 
-    const { updateDeepLAuthKey } = useDeepLAuthKey();
+    const { updateDeepLAuthKey, saveSuccessDeepLAuthKey } = useDeepLAuthKey();
     const { updateSelectedCTranslate2WeightType } = useSelectedCTranslate2WeightType();
     const {
         updateDownloadedCTranslate2WeightTypeStatus,
@@ -352,7 +352,7 @@ export const useReceiveRoutes = () => {
 
         // Translation
         "/get/data/deepl_auth_key": updateDeepLAuthKey,
-        "/set/data/deepl_auth_key": updateDeepLAuthKey,
+        "/set/data/deepl_auth_key": saveSuccessDeepLAuthKey,
         "/delete/data/deepl_auth_key": () => updateDeepLAuthKey(""),
 
         "/get/data/ctranslate2_weight_type": updateSelectedCTranslate2WeightType,